Home  :  Product Search  :  Site Map  :  Checkout  :  Track Your Order

Kyoritsu 6010B Multi-function Tester and Software 8212 USB

FREE DELIVERY!
Kyoritsu 6010B Multi-function Tester and Software 8212 USB
Click to enlarge image(s)
Kyoritsu 6010B Multi-function Tester is the only way to go for professional contractors.
Need to down load your Test Results? Of course you do, Its the only way to cover your butt and submit
professional test results.

SAVE TIME Results download straight from the meter to your PC.

We have made it easy and included the software and cable (RRP 196.54+GST) ADDED BONUS

One instrument can do all this, eliminates the need to carry 4 different single function testers.
•Continuity
•Loop Impedance
•Insulation
•RCD

• Continuity:
20/200Ω
200mA Test Current
• Insulation:
500/1000V, 20/200MΩ
1mA Rated Test Current
• Loop Impedance:
20/2000Ω
15mA Test Current at 2000Ω (No RCD Trip)
• RCD:
10/30/100/300/500mA
x1/2, x1, Fast Trip(40ms), DC, Auto Ramp
• Test of a large kind of RCD's:
Standard, Selective, AC and A
(DC sensitive breakers)
• Uc(Contact Voltage): 100V
• Designed to IEC 61010-1, IEC 61557
• Data Memory:300 measured results
• The stored data can be transferred to PC via USB *SOFTWARE AND USB CABLE INCLUDED!!!*

YOU GET THESE ACCESSORIES
7025 (Test Lead)
KAMP10* (Test Lead with IEC Connector)
Pouch for Test leads
Shoulder Strap
Shoulder Pad
Instruction Manual
Submit a Review...

Kyoritsu 6010A Multi-function Tester

4 IN 1 MULTI FUNCTION TESTER
Kyoritsu 6010A Multi-function Tester
Click to enlarge image(s)
DISCONTINUED PRODUCT

This Product is an execellent replacement
multi-function-testerMFT4


Kyoritsu 6010A Multi-function Tester is an advanced multifunction tester.
One instrument can do all this, eliminates the need to carry 4 different single function testers.
•Continuity
•Loop Impedance
•Insulation
•RCD
Continuity and Insulation Testing
Live circuit warning LED:
Immediate illumination of a warning lamp if the circuit under test is live

Auto Discharge:
Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing

Integral overload protection on internal continuity and insulation test circuitry
Autoranging
500V DC test voltage for insulation tests
200mA short circuit current on continuity ranges

Loop and RCD Testing
Wiring connection check LED’s:
Immediate indication if wiring of circuit under test is correct

Overheat Protection:
Rapid detection of overheating of internal circuitry,display of warning signal to user and automatic halting of measurement

Supply Voltage Indication:
Can display supply voltage value in loop impedance mode

Low Current Loop Impedance Test:
Short duration low test current will prevent tripping of many passive RCDs

Auto Data Hold:
Retains displayed reading for set period following test

Phase Angle Selection:
Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs

YOU GET THESE ACCESSORIES
7025 (Test Lead)
KAMP10* (Test Lead with IEC Connector)
Pouch for Test leads
Shoulder Strap
Shoulder Pad
Instruction Manual
Submit a Review...
Need to see more electrical test equipment ? click here

MULTIFUNCTION TESTER

MULTIFUNCTION TESTER
Click to enlarge image(s)
The MFT4 multifunction testers can a range of electrical tests

Non-trip and high current loop impedance tests. 
Displays PFC & PSC fault currents.
Voltage and polarity test
Insulation resistance 250V/500V/1000V.
Low ohms continuity measurements. 
RCD trip time and ramp testing of Residual Current Devices (RCD’s) rated at 10mA and 30mA.

These multifunction testers meet all the mandatory electrical testing requirements of AS/NZS 3000.
The MFT4 offers the safety category CAT IV on loop impedance and RCD testing and
comes complete with calibration certificate and hard carry case. 
Submit a Review...

Why not tell your Social networks about Tools Online?

Copyright © Electricians Tools Online, Australia
a division of Green Ninja Electrical Pty Ltd 
info@electricianstoolsonline.com