Home  :  Product Search  :  Site Map  :  Checkout  :  Track Your Order
Kyoritsu 4140 Fault Loop Impedance Tester

*PLEASE NOTE*  NEW ORDERS WILL NOT BE PROCESSED OR SENT FROM DEC 16 TO  DEC 23

SORRY FOR ANY INCONVENIENCE

NEW PRODUCT!!
Kyoritsu 4140 Fault Loop Impedance Tester
Click to enlarge image(s)
Anti-Trip Technology for complete trip free Loop testing on all RCDs rated 30mA and above.
Dual Display allows simultaneous measurements like Loop & PFC/PSC.
Two wire connection for Loop L-L, L-N and PSC testing is possible.
Phase rotation, Voltage and Frequency measurements.
Lock-down test button for 'hands free' testing with auto-start operation.
4140
CE
Display and front panel keyboards with Backlight to be visible in dark places.
Water and Dust proof (IP54)
Loop Impedance
Function L-PE ATT OFF L-PE ATT ON L-N / L-L
Rated Voltage 230V (50/60Hz) L-N: 230V (50/60Hz)
L-L: 400V (50/60Hz)
Operating Voltage 100~280V (45~65Hz) 100~500V (45~65Hz)
Range (Auto-Ranging) 20/200/2000Ω 20/200/2000Ω
(L-N<20Ω)
20Ω
Nominal Test Current at 0Ω External Loop: Magnitude/Duration at 230V 20Ω: 6A/40ms
200Ω: 2A/20ms
2000Ω: 15mA/500ms
L-N: 6A/60ms
N-PE: 10mA/approx.5s
20Ω: 6A/20ms
Accuracy ±3%rdg±4dgt (*1) ±3%rdg±6dgt (*1) L-N: ±3%rdg±4dgt
L-L: ±3%rdg±8dgt
PFC (L-PE) / PSC (L-N / L-L) (*2)
Function PFC PFC (ATT) PSC
Rated Voltage 230V (50/60Hz) L-N: 230V (50/60Hz)
L-L: 400V (50/60Hz)
Operating Voltage 100~280V (45~65Hz) 100~500V (45~65Hz)
Range (Auto-Ranging) 2000A/20kA 2000A/20kA (L-N<20Ω) 2000A/20kA
Nominal Test Current at 0Ω External Loop: Magnitude/Duration at 230V 20Ω: 6A/40ms
200Ω: 2A/20ms
2000Ω: 15mA/500ms
L-N: 6A/60ms
N-PE: 10mA/approx.5s
20Ω: 6A/20ms
Phase Rotation
Operating Voltage 50~500V, 45~65Hz
Remarks Correct phase sequence: displayed "1.2.3" and mark
Reversed phase sequence: displayed "3.2.1" and mark
Volts
Function Volts Frequency
Measuring range 0~500V 45~65Hz
Accuracy ±2%rdg±4dgt ±0.5%rdg±2dgt
General
Applicable standards IEC 61010-1 CAT.III 300V (500V L to L),
IEC 61010-031, IEC 61557-1, 3, 7, 10,
IEC 60529 (IP54), IEC 61326 (EMC)
Power source 1.5V AA batteries × 6 *Use of alkaline batteries (LR6) is recommended.
Dimensions 84 (L) × 184 (W) × 133 (D) mm
Weight 860g (including batteries)
Accessories included Main cord (*3)
Distribution board test lead (*4)
9155 (Shoulder strap)
9156 (Soft case)
LR6 (Battery) × 6, Instruction manual, Calibration certificate

Submit a Review...

Why not tell your Social networks about Tools Online?

Copyright © Electricians Tools Online, Australia
a division of Green Ninja Electrical Pty Ltd 
info@electricianstoolsonline.com